Wafer Ball Valves

Wafer Ball Valves with Ferrule

On this pageyou will find documentation for both the Z030 ferrule wa fer ball valves and the Z035 2-piece (split body) wafer ball valves , and you can download the data sheets below .All ball valves are PED 2014/68/EU and ATEX 2014/34/EUcertified .

2-piece split body flat ball valve

Wafer Ball Valves: General Uses

Shut-off valve (ON-OFF) for industrial systems use in oil & gas, hydraulic and pneumatic systems, chemical, pharmaceutical, food & beverage and steam systems up to +195°C with standard seals.

Wafer Ball Valves: Construction according to regulations.

UNI-EN 12516-2
ASME B1.1-2019
ISO 14313: 2007
ASME B16.34
ASME B16.5
EN 558-1

Wafer Ball Valves: Construction Diameters

Wafer with Ferrule from DN 15 (Ø1/2") to DN 125 (Ø5")
Wafer in 2 Pieces Split Body from DN 15 (Ø1/2") to DN 150 (Ø6")

Materials used.

Carbon steels / INOX steels
Special steels (on request).

Pressure rating (operation)

PN 6 / PN 10 ÷ 40 - ANSI 150/300

Design features (Standard):

Body union / threaded ferrule with double seal (Wafer with Ferrule)
Body union / side with double seal (Wafer in 2 Pieces Split Body)
'V' pack on stem / O-R pack on stem
Anti-ejection stem
EN stamping / CE marking
Anti-static device according to BS 5146/74
ISO 5211 stuffing box
100% valve testing with air at 7 bar (immersion)

Design features
(Optional / Accessories on request):

Reinforced PTFE Seals (GLASS / CARBON

Seals in other special material:

PEEK / PE / GRAPHITE / POM-C (Delrin ®)
Stem extension
Cryogenic extension (for critical service)
Handle / Oval handwheel
Pneumatic actuator SE / DE
Solenoid valve
Electric motor
Limit switch holder box
Manual reducer
Positioner (pneumatic / electro-pneumatic)
Heating channel on valve body

Wafer Ball Valves with Ferrule: Operating Temperature Range

- 10°C to + 180°C for construction materials
made of carbon steel, seats and seals made of P.T.F.E.
- 20°C to + 180°C for construction materials
made of stainless steel, seats and seals made of P.T.F.E.
- 20°C to + 70°C for construction materials
made of steel and seats made of DELRIN.

Wafer Ball Valves with Ferrule: Standards for Connections/Connections

ASME B16.5 flanged pipes and flange assembly

Materials of construction body and valve latches:

ASTM A 350 LF2 (corr. EU S355J2)
Low alloy carbon steels for quenching and tempering.
AISI 304 / AISI 304L - AISI 316 / AISI 316L
Austenitic-type stainless steels.
DUPLEX F51 / Super DUPLEX F55 / Hastelloy
C276 / MONEL - Special steels of the
Austenitic-Ferritic type.
AISI 420 - Stainless steels of the Martensitic type.

Materials of construction seals and valve seats:

R.T.F.E. - TEFLON ® reinforced/glass filled,
graphite, metal (in %).

Accessories and Options

Valves can be painted according to customer specifications.

A350 LF2 steel valve body, 316L stainless steel stem.

304L stainless steel valve ball.

Ball with balance hole.

Other materials are available upon request.

Complete customization of valves possible.

Limit switch box in aluminum - stainless steel - technopolymers.

Pneumatic rotary actuators

Electric rotary actuators

Manual gearboxes

Levers and solenoid valves

Methods and Precautions for Use

Z030-Z031 and Z035 CE-marked ball valves meet the requirements of PED Directive 2014/68/EU and/or ATEX Directive 2014/34/EU.

1) All standard Z030-Z031 and Z035 valves can be used in a temperature range of -10°C to +150°C.

For different temperatures, the valve should be equipped with seals made of material suitable for the required operating temperature.

2)All standard Z030-Z031 and Z035 valves are not equipped with devices against internal overpressure, such devices as balance hole or etched seat are available upon specific request from the end user.

3) All standard Z030-Z031 and Z035 valves in general, do not accept the presence of ice and fluids subject to instability inside the valve, as they would block the OPEN or CLOSE maneuvers, in addition, the increase in fluid volume can damage the valve components making it no longer usable.

4) Standard Z030-Z031 and Z035 valves can be used at low temperatures (from -29°C and down to -196°C for cryogenic service) or at high temperatures (up to +250°C). Any requirements must be agreed upon by the customer with the sales department when ordering/offering.

5) Z030-Z031 and Z035 valves can be used for "industrial" oxygen use only if thoroughly degreased and packed in special bags. Medical use, if any, should be specified when ordering/bidding.

To increase the performance of plants and production lines find our catalog ball valves.